manualshive.com logo in svg

SOLTEK SL-53D5-S, Руководство пользователя и техническое справочное руководство, Страница: 32 / 44

Поделиться
Скачать
SOLTEK SL-53D5-S Скачать руководство пользователя страница 32

Award BIOS Setup 27

Video BIOS
Cacheable

Choose Enabled or Disabled
(default).  When Enabled, the access
to the VGA BIOS ROM addressed at
C0000H-C7FFFH is cached.

System BIOS
Cacheable

Choose Enabled or Disabled
(default).  When Enabled, the access
to the system BIOS ROM addressed
at F0000H-FFFFFH is cached.

Memory Hole At
15M-16M

Choose Enabled or Disabled
(default).  In order to improve
performance, certain space in
memory can be reserved for ISA
cards.  This memory must be
mapped into the memoryÕs space
below 16MB.

SDRAM
Speculative Read

Use the default setting.  This
function allows a DRAM read
request to be generated slightly
before the address has been fully
decoded.

OnChip USB

Enabled:  Enable USB function and
will occupy one IRQ.

Disabled (default):  Disable USB
function and will not occupy IRQ.
Choose Disabled when it is not
connect to an USB device.

USB Keyboard
Support

Choose Disabled (default) or
Enabled.
Disabled: No USB keyboard is

installed.

Enabled:

USB keyboard is
connected.

3. Press <ESC> and follow the screen instructions to save or

disregard your settings.

Содержание SL-53D5-S













































Отзывы:

Нет отзывов