54
KT400-C
Type
Auto
Cylinders
Heads
Write Precompensation
Sectors
Maxium Capacity
0 Mb
LBA Mode
Off
Black Mode
Off
Fast Programmed I/O Modes
0
32 Bit Transfer Mode
Off
IDE Device Config
Press Enter on IDE Device Config will let you
configure the IDE devices on board and the fol-
lowing menu will reveal the following submenu
for your configuration of the hard Disk you have
installed:
Floppy options
Press Enter on “Floppy options” will let you select
this field to the type(s) of floppy disk drive(s) installed
in your system. The choices are:
1.2MB, 5.25 in.
720KB, 3.5 in.
1.44MB, 3.5 in.
2.88MB, 3.5 in.
Not Installed
Primary IDE Master : Not Installed
Setup Help
System Time
The BIOS shows the time of the day in the format:
hh:mm:ss. Choose the field with the Arrow keys
and change the time with the Page Up/Page
Down +/- keys.
System Date
The BIOS shows the date of the day in the format:
mm:dd:yy :day of the Week. Choose the field with
the Arrow keys and change the value with the
Page Up/Page Down +/- keys.
F1: Help
: Select Item +/- : Change Values
F9: Setup Defaults
Esc: Previous Menu Enter: Select Sub-Menu
F10: Save and Exit