Chapter 4 BIOS Setup
67
AGP Fast Write
Allows you to enable / disable the AGP Fast Write
function
SDRAM Command
Rate
Allows you to set the SDRAM Command Rate.
Choices: 1T; 2T
SDRAM Frequency
Allows you to set the SDRAM frequency.
Choices: Auto; 200MHz; 266MHz; 333MHz; 400MHz
Configure SDRAM
Timing by SPD
SPD (Serial presence detect) is a device in memory
module for storing the module information such as
DRAM timing and chip parameters. If this option is
enabled, BIOS will access SPD automatically to
configure module timing. If disabled, DRAM timing
can be configured manually.
SDRAM CAS# Latency
With SDRAM Timing by SPD disabled, you can se-
lect the SDRAM CAS# (Column Address Strode)la-
tency manually.
Choices: 1.5 Clocks; 2 Clocks; 2.5 Clocks; 3 Clocks
SDRAM Bank Inter-
leave
This item allows you to enable / disable SDRAM
Bank Interleave function.
Choices: Disabled (default); Enabled
Memory Hole
Allows you to enabled / disabled (default) the sup-
port of Memory Hole which is reserved for ISA card.
SDRAM Burst Length
With SDRAM Timing by SPD disabled, you can se-
lect the SDRAM Burst length manually.
Choices: 8QW; 4QW
AGP Read Synchroni-
zation
Allows you to enabled / disabled (default) the AGP
Read Synchronization function.
AGP Mode
Allows you to see the AGP Mode on board. The
default setting is Auto. This item support 4X/8X AGP
Mode
AGP Comp. Driving
Allows you to Auto or manually set the AGP Comp.
Driving.