manualshive.com logo in svg

SOLTEK 85ERV2, Руководство пользователя, Страница: 43 / 62

Поделиться
Скачать
SOLTEK 85ERV2 Скачать руководство пользователя страница 43

64

85ERV2 / 85ERV2-L

2. Use one of the arrow keys to move between options and modify the

selected options by using PgUp / PgDn / + / -  keys. An explanation
of the <F> keys follows:

<F1>: “Help” gives options available for each item.
<F9>: Setup BIOS default values.
<F10>: Save and Exit Setup.

Quick Boot

Allows you to enable / disable quick boot of your
system.

3. Press <ESC> to return to the Main Menu when you finish setting up

all items.  The following item descriptions are provided as a quick
guide.

1st/2nd/3rd Boot

Device

Allows you to set floppy or IDE devices already in-
stalled on board to be the 1st/2nd/3rd boot device.
Choises: Disabled; Device(s) installed

Try Other Boot De-

vices

Allows you to enable/disable system to try to boot
with other boot devices.
Choises: Yes; No

Display Mode at Add-

On ROM Init

Initial Display Mode

If option is “Silent”, the initial display mode will be
set to one with Soltek logo. If option is “BIOS”, the
normal BIOS display mode will be shown.
Choices: silent (default); BIOS

S.M.A.R.T. for Hard

Disks

Allows you to enable / disable the Self Monitoring
Analysis and Reporting Technology for the hard disk.
Choices: Enabled; Disabled

If the item “Initial Display Mode” is set to “Silent”, two
sub-modes are provided for the initial display mode. If
“Force BIOS” is chosen, the vendor’s logo screen will be
followed by the “Add-on ROM” initial screen (the screen
showing the add-on card BIOS message). If “Keep Cur-
rent” is chosen, no “Add-On ROM” screen is followed.

Delay for Hard Drive

(Sec.)

Allows you to adjust the time of detecting hard disk
on board at booting system.
Choices: Disabled; 1~10 sec. in 1 sec. stepping.

Содержание 85ERV2































































Отзывы:

Нет отзывов