20
85ERV2 / 85ERV2-L
2-3 Memory Installation with Warning LED
184-Pin DIMM Notch Key Definitions (2.5V)
DRAM Key Position
Voltage Key Position
2.5V
Module Latch
• This series supports up to 3GB unbuffered DDR 333/266/200 DRAM,
with 3 DDR DIMM slots on board. Do not insert other type of modules
into these slots. DDR 400 Memory Module can be compatible with
this series if it has passed Soltek validation. soltek Computer Inc.
typically runs a DDR 400 Memory Module Validation Program for
Chipset VIA P4X400A. Detailed information is available in Soltek Web
Site: WWW.soltek.com.
• DDR DIMM slot has 184-pins and one notch. Insert a DDR SDRAM
vertically into the 184-pin slot with the notch-to-rib matching. Press
the Module down in a gradual way until it surely reaches the bottom
and clicks straight up the two latches on the left and right of the slot.
If any one of the latches has not turned up completely, you should
unplug the module and press it down a bit more firmly.
How to tackle the memory Modules:
• Make sure to unplug your power supply before adding or removing
memory module.
• Pay attention to the orientation of the DIMM slots.
• Make sure you have the right type of memory module for your
mainboard.
2-3.1 To Install DDR DRAM Module
DDR Notch
DDR Rib
2-3.2 To Remove a DIMM
Press down the holding latches on both sides of slot to release the
module from the DIMM slot.