background image

65KV

1

T

his User‘s Guide & Technical Reference is for assisting system

manufacturers and end-users in setting up and installing the

mainboard.
Every effort has been made to ensure that the information in this
manual is accurate. Soltek Computer Inc. is not responsible for
printing or clerical errors. Information in this document is subject to
change without notice and does not represent a commitment on
the part of Soltek Computer Inc.
No part of this manual may be reproduced, transmitted, translated
into any language in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose
without the express written permission of Soltek Computer Inc.
Companies and products mentioned in this manual are for identifi-
cation purpose only. Product names appearing in this manual may
or may not be registered trademarks or copyrights of their respec-
tive companies.

S

oltek computer inc. Provides this manual “As is “ without war

ranty of any kind, either express or implied, including but not

limited to the implied warranties or conditions of merchantability or
fitness for a particular purpose. In no event shall Soltek computer
inc. Be liable for any loss or profits, loss of business, loss of use or
data, interruption of business, or for indirect, special, incidental, or
consequential damages of any kind, even if Soltek computer inc.
Has been advised of the possibility of such damages arising from
any defect or error in this manual or product.

© Copyright 2000 Soltek Computer Inc.

All rights reserved.

http://www.soltek.com.tw

e-mail: [email protected]

EDITION : March 2000
VERSION : V2.0

Содержание 65kv

















































Отзывы: