010
011
04
Installation and Wiring Compliance
1. Installation and wiring must comply with the State and National
Electrical Codes.
2. The SATELIS PRO 50W model is intended for outdoor use
only and should not be installed in an unventilated area. it must be
installed in an environment within the operating temperatures
defined for the product.
3. The average sunshine in the installation area should be above
3.5 hours/day in order to ensure full function of the light fixture.
Avoid areas with shades.
4. Before installation, if applicable, ensure the light pole and its
foundation are solid enough to support the light fixture(s).
5. Before installation, ensure that the battery is fully charged. Install during
sunny days if possible.
6. Before installation, press the ON/OFF key in the remote control
and check whether it shows a red light on the indicator. Cover the
panel and check if the light module turns on normally within 1 minute.
After Installation
The light fixture will automatically turn on at night and turn off
during daylight.
Important Considerations
Orient the solar panel facing the equator
(e.g. facing south if in northern hemisphere).
Have a tilt angle of at least 15° to avoid dust accumulation
(0°=horizontal plane).
