SoloStrength speedfit frame, Руководство владельца и по безопасности

Страница: 16 / 20

16
INSPECT YOUR SOLOSTRENGTH SPEEDFIT GYM PRIOR TO EACH USE
Before beginning your workout session, be sure to make the following inspection:
To view the latest accessories to use with your SoloStrength Lifestyle Station, please visit our website at www.
SoloStrength.com . Please register your email address on our site to be notified of new accessories and special
promotions.
ROUTINE MAINTENANCE
Make sure the equipment is fully opened (folding mat out PRO models) and sitting on a solid, level surface with
plenty of clearance on all sides and above.
Unit should be free of debris under frame and folding mat and carpet use. If on hard floor surface, it may be de-
sired to use an additional mat to ensure protection of surface.
Make sure all the screws and bolts are securely in place and the support bar is level and locked into position.
Handles are not locked until the security rings (or grooves) are fully exposed on the bar.
Check that the support bar is traveling correctly in the groove on each side and free of resistance.
•
•
•
•
Wipe down your SoloStrength system on a regular basis using a clean cloth and light soapy solution. Do not
leave towels or workout clothing laying or hanging on the equipment.
Periodically check the following parts for signs of fraying or other wear: the slider(s), frame and locking screws.
If the sliders need to be replaced - do not use your unit, wait until the part is replaced. If any other part than the
ones listed above needs to be replaced, do not use that part until it is replaced.
If debris should cause resistance in the channel of your SoloStrength and its sliding function, use a disposable
towel to wipe clean the channels and the sliders, and re-apply a small (pea size) amount of grease in 4 places
along the sliding channel on each side of the SoloStrength structure.
Never use a lubricant such as WD-40 or ArmorAllto lubricate the unit. Use only 3-in-1oil or machine oil to lubricate
the springs in locking pins and clear lithium or silicone grease for the slider channel. Only if required.
•
•
•
•
Inspection, Maintenance & Storage
Accessories