Solo TOC-1, Руководство пользователя

Страница: 50 / 144

4-18
Brakes
Brakes
Electronic Parking Brake (EPB)
When parking on a hill or slope, ensure
that you set your wheels in accordance
with the instructions in “Parking on hills and slopes”, page 6-7
before applying the EPB.
This vehicle features an EPB, which has both manual and
automatic functions.
When the EPB is engaged, the EPB indicator will
illuminate on the instrument cluster display. See
“Instrument Cluster Display”, page 4-9 .
Note: The EPB can only be engaged or disengaged manually
when the vehicle's speed is less than 2 mph (3 km/h) and the key
switch is ON. See “Key Switch”, page 4-6 .
Note: The EPB can be engaged in any Drive Mode Selector
position. See “Drive Mode Selector”, page 4-7 .
Note: Charge the 12V battery if it lacks sufficient charge to
power the EPB. See “Charging the 12V battery”, page 7-33 .
Automatic EPB operation
The EPB will engage automatically when the vehicle's speed is
less than 2 mph (3 km/h) and the key switch is turned to the
OFF position. When the vehicle is in READY mode, the EPB
will automatically engage in any drive mode when the seat belt
is not fastened, a door is opened, and the brake pedal is not
pressed.
The EPB will disengage automatically when the vehicle is in
READY mode, the Drive Mode Selector is in D (Drive) or R
(Reverse), and the accelerator is pressed.
Note: If the vehicle is stopped on a slope when the EPB is
engaged, the EPB will automatically adjust when to release the
brake according to the level of the slope to prevent rolling.
Manual EPB functions
The EPB is manually controlled by a rocker switch to the right
of the steering wheel. After this switch is pushed or pulled, it
will return to its neutral position.
WARNING
P