Solo TOC-1, Руководство пользователя

Страница: 23 / 144

2-5
Pre-Drive Inspections
Pre-Drive Inspections
Pre-Drive Inspections
Failure to perform the recommended pre-
drive inspections could result in
component failure while driving, which could result in serious
injury or death. Always perform the pre-drive inspections
before each drive. Perform any necessary services before
operating if inspections reveal the need for adjustment,
replacement, or repair.
To keep your SOLO in safe operating condition, always
perform the recommended pre-drive inspections before each
use of the vehicle. This is especially important before making a
long trip, on first driving the vehicle after an extended period of
inactivity or non-use, and when removing the vehicle from
storage.
You must be familiar with all instruments and controls in order
to perform the pre-drive inspections. See “Controls and
Features”, page 4-1 .
Pre-Drive Inspection Checklist
General inspections
Turn the key switch to the OFF position before performing the
general pre-drive inspections. See “Key Switch”, page 4-6 .
If inspection of any item reveals component failure, have the
component repaired or replaced before operating the vehicle.
See “Maintenance”, page 7-1 .
WARNING
Item Inspection Procedure See Page
Tires Inspect tire condition, pressure, and
tread depth.
7-17
Wheels Inspect for loose, damaged, or missing
wheel nuts.
7-18
Underside Look for fluid deposits underneath the
vehicle that might indicate a leak.
-
Fasteners Inspect entire vehicle for loose,
damaged, or missing fasteners.
-
Brake Pedal Check brake pedal for excessive
travel, and verify smooth operation
and a full return.
-
Accelerator
Pedal
Check accelerator pedal for excessive
travel, and verify smooth operation
and a full return.
-