CSW-H80 User Manual Ver. 3.0
- 37 -
5.3.2 Examples
TCP Server – setting parameters and passive connection
Figure 5-6 time chart
Time
States
~
configuring parameters with AT commands
①
ATA command has arrived.
~
CSW-H80 is listening to TCP connection requests.
②
A remote host has sent SYN segment to H80.
~
processes of TCP connection
③
TCP connection has been established.
~
CSW-H80 sends “CONNECT” message to the serial port.
Table 5-10 states of each point
Some of the response messages from the serial port of CSW-H80 are omitted on
above figure.