Sollae Systems CSW-H80, Руководство пользователя

Страница: 37 / 69

CSW-H80 User Manual Ver. 3.0
- 36 -
http://www.ezTCP.com
5.3 AT Command
AT command is a mode which users control CSW-H80 with AT command like controlling
modem. In this mode, active and passive TCP connections are available. And users are
allowed to configure some environmental parameters with extended commands.
5.3.1 Key parameters
The configuration should be implemented via the serial port of H80
Commands Description Examples
+PLIP Local IP Address at+plip=10.1.0.1<CR>
+PLP Local Port at+plp=1470<CR>
+PRIP Peer IP Address at+prip=10.1.0.2<CR>
+PRP Peer Port at+prp=1470<CR>
+PDC DHCP at+pdc=1<CR>
+PPE PPPoE at+ppe=1<CR>
+PTO Timeout at+pto=10<CR>
+PWP Store setting at+pwp<CR>
Table 5-9 some of extended commands for configuration

Related items with IP Address and Local Port
Local port can be set as well as IP address related parameters like IP Address, Subnet
Mask and Gateway IP Address.

Peer Address / Peer Port
IP address and local port of a remote host can be set.

Type of assigning IP address: Manual, DHCP, PPPoE
Manual setting and automatic assigning protocol (DHCP, PPPoE) are available.

Others
Some of options including [Timeout] can be configured in this mode.

If you want more information about the ATC mode, please refer to the [ATC mode]
document in [Download] >> [Technical documents] >> [Basic and Common part]
category of our web site.