SOLIS 7910, Руководство пользователя

Страница: 62 / 86

62
GB
▲
BEFORE FIRST USE
•
To burn production residues on the grill plate and to burn in the protective coa­
ting on the heating element, all removable appliance parts have to be cleaned
and the assembled appliance has to heated up before first use.
1. Remove the grill plate from the appliance base. Clean the grill plate, the dough
cutter, the square pans and the round mini­woks as well as the plastic spatulas
in hot dish water with a soft towel or sponge. After that, rinse all parts in clear
water and dry them.
2. Wipe the die­cast plate and the cold zone tray clean with a moist, soft towel.
3. Place the appliance on a dry, heat and moisture resistant worktop.
4. Place the dry grill plate back on the base and plug the connection adapter of the
power cord into the appliance jack and the power plug into a suitable power
outlet. The pans should not be in the appliance.
5. Switch the appliance on with the red main switch (red function light glowing) and
set the temperature control to the highest position (all the way to the right). Addi­
tionally, switch on the lower heating element by setting the black switch to “I”.
6. Let the appliance heat up for 10 minutes, after that return the temperature con­
trol to its lowest setting (all the way to the left) and set both switches back to
“0” to switch the appliance off. Pull the plug and let the appliance cool down.
7. Wipe both sides of the cooled down grill plate with a slightly moist towel.
8. Your appliance is now ready for use.