EN
Germicidal UVC lamp GL01
Operating Instructions
Dear customer, thank you for purchasing our product. Please read the following instructions carefully and
follow them to ensure that the product serves you safely and to your full satisfaction. This will prevent
misuse or damage. Avoid unprofessional handling of this appliance and always observe the electrical
appliance usage guidelines. Keep the instruction manual carefully. For indoor use. This product should only
be used by an adult. Never expose to environments with high humidity (e.g. bathroom), avoid contact of
the product with liquids.
Contents of the set
1x germicidal UV lamp
1x remote control
1x instruction manual
Functions
Direct radiation lamps are used where it is possible to ensure that people are not present during
disinfection. Disinfection with these lamps is most effective because they sterilise micro-organisms on the
surface of objects as well as in the air and liquids. This product is used for direct and indirect disinfection of
premises.
Direct disinfection refers to gases, liquids and objects that are exposed to direct effective ultraviolet C
radiation. These gases, liquids or objects must be directly exposed to UVC radiation. Effective radiation
means the intensity of UVC radiation sufficient to inactivate viruses, moulds, bacteria or fungi.
Indirect disinfection is carried out with O3 gas (ozone), which is produced by UVC radiation. This gas enters
all parts of the room (even behind obstacles) and disinfects.
Service
Plug the device into a power outlet. The device has a 15/30/60min timer option. Select the length of the
interval according to the level of disinfection required. Use the button on the lamp to select the desired
time interval. Red light 15 min, green light 30 min, white light 60 min. Once the desired interval length has
been selected, the countdown starts and is signalled by a beeping sound. This countdown lasts approx. 15 -
20 sec. During this time, the electrodes of the tube are heated and then the lamp is switched on. The lamp
will be switched off after the specified time interval or can be switched off at any time by pressing the
button on the lamp.
Remote control - press the red power button on the remote control. Then press the button of the
appropriate time interval length (15min, 30min, 60min). This will cause the tube to glow, approx. 15 - 20
sec, after which the lamp will be switched on. The lamp will be switched off after the specified time
interval or can be switched off at any time by pressing the red power button on the remote control.
Recommended time for disinfection: room approx. 20m2 - 15min; room approx. 30m2 - 30min; room
approx. 40m2 - 60min.
Safety instructions
Once the lamp is switched on, neither people nor animals should be in the disinfected environment. UVC
radiation is harmful even in small doses and may have some negative effect on humans, animals or plants.
The intensity and duration of exposure are decisive. Do not look directly into a lit UVC lamp. Even a small
dose of UVC radiation can cause conjunctivitis or so-called welding disease (ophthalmia photoelectrica) if
the eye is exposed for a long time. At higher doses, UVC radiation can severely damage eyesight. The skin
and eyes of children are particularly sensitive to the effects of UVC radiation. Children must not be exposed
to direct radiation at all. Only reflected radiation from distant walls or ceilings is permissible for the
shortest possible time. The room should be cleaned of dirt before disinfection begins. The room should be
dry and the temperature between 20° and 40°C. UVC radiation can damage various paintings, pictures and
decorations.
