Solidyne UNIDEX UX24, Руководство пользователя

Страница: 10 / 48

2.3.1 Microphones inputs
A
The console has four inputs for microphones,
electronically balanced. They have switchable
48V power for each input. Each input uses an
RJ45 connector that connects using a SOL-
M25/1XLRF cable.
NOTE
The pinout is compatible with balanced stereo patch
cords RJ45 to XLR (SOL-M12/XLRF y SOL-M25/XLRF).
Mic inputs uses only the LEFT channel.
2.3.2 UNIDEX inputs
B
UNIDEX inputs -a proprietary Solidyne develop-
ment- are enhanced audio inputs that man-
ages other signals (POE and communication)
to control the Solidyne UDX external adapters .
There are 16 mono inputs , which can be grouped
into stereo pairs (8 stereo total). The specifications
are counted as mono inputs because they are usu-
ally used to connect microphones, telephone lines
and cell phones.
MODELS WITH DANTE (UX24-A67)
When UX24 includes the DANTE/AES67 option (UX24-
A67) the inputs UNIDEX 5, 6, 7 and 8 are not available.
Internally they become AoIP inputs 1, 2, 3 and 4.
The UDX adapters connects to the UNIDEX inputs
via RJ45 to RJ45 patch cords (SOL-P25 or SOL-
P50). There are different UDX adapters:
• POTS [UDX 2TEL and UDX 2TEL-P adapters]
• Smartphones via Bluetooth [UDX TEL+BT]
• Microphones : Dynamic and phantom pow-
ered condenser [UDX 2MIC]
• Dynamic microphones [UDX DMIC]
• Computers via USB AES3
→
UNIDEX inputs can also be used as conventional
line level audio inputs (balanced).
Each RJ45 UNIDEX connector corresponds to one
input and contains two channels; left and right if
stereo. In this case the connection is made using
adapter cables by Solidyne (or others brands like
StudioHub
(c)
, by AngryAudio).
2.3.3 Balanced analogue inputs
C
There are 4 balanced stereo inputs. Each input
uses one RJ45, since one STP cable can car-
ries both left and right balanced signals. At the
end of the cable, the RJ45 is converted to the
apropiate audio connector.
To connect an input in unbalanced mode, an
adapter cable is used - the signal terminals (-) are
connected to the cable shield, and the (+) terminal
to the ‘live '. See 2.5 - Connectors and wiring .
MODELS WITH DANTE (UX24-A67)
When UX24 includes the DANTE/AES67 option (UX24-
A67) the balanced inputs 9, 10, 11 and 12 are not avail-
able. Internally they become AoIP inputs 5, 6, 7 and 8.
2.3.4 AES3 digital inputs
D
There are 4 AES3 digital stereo inputs. Each in-
put uses an RJ45 connector, which will be con-
nected with RJ45-RJ45 CAT5 cable and SOL-
F3/XLRF adapter . For cable compatibility, use
the same pin-put of the stereo balanced in-
puts, but only the left channel is connected.
They also support connection of S-PDIF.
2.3.5 USB AUDIO I/O
K
On-board USB provides 4 stereo input chan-
nels or “stereo playback devices” at the com-
puter side; and 4 stereo output channels or
Page 10 Solidyne UNIDEX UX24 www.SolidynePro.com