Automation made simple.
l
www.solidmation.com
Electrical Installation:
Electrical installation shall be done by an authorized
electrical technician or a qualified professional.
Specifications
HPA-2130
supports two motors load, or one motor
and one light fixture with transformer and dichroic
lamps, with connection to a Switch on/off
The core functions enabled for each channel are
as follows:
l
Push-button On/Off
l
Toggle On/Off
HPA-2140
is prepared to be connected to toggle
or push-button switches, with the dimmable switch
function being its standard configuration.
In case of having toggles available, the toggle
function must be configured from the software.
The core functions enabled for each channel are
as follows:
In-wall modules
HPA-2130: Dual appliance switch
Two-channel non-dimmable switch for general
purposes: motors, lamps, etc.
HPA-2140: Dual dimmer
Two-channel dimmable switch for resistive loads,
halogen lamps, incandescent bulbs, etc.
Installation manual
l
Dimmable push-button
l
Dimmable toggle
l
Toggle On/Off, with dimmered power-on and
power-off
l
Toggle On/Off
In-wall module devices from Home Automation
series are designed to be exclusively installed in
standard electrical boxes fitted behind light switch
panel.
Electrical connection diagram “A” shows an
example of an installation with 2 incandescent
bulbs.
In case of failure or defects, please contact
authorized technical support.
Technical characteristics
l
Voltage: 100-240 VAC 50/60 Hz.
l
Quantity of independent channels: 2
l
Maximum section of cables for installation: 1.5 mm
2
l
Maximum output voltage:
l
HPA-2140: 2.5A (sum of both channels)
Example: Channel 1: 2A and Channel 2: 0.5A
HPA-2130: 1.5A (sum of both channels)
Neutral
Supply Line
Solidma
tion-MA-HP
A-2130_2140_V3-Ins
talla
tion_Manual-00-EN
Connection diagram “A”
Toggle 1
Toggle 2
