Confidential & Proprietary 12/17
Optional Part
R-OPTIC
Optical Cable Assembly Connector
1EA
Basically, the common part of N2ROU should have an enclosure and it is equipped with RCPU
to inquire and control state of each module, R_OPTIC to make both of electronic-optical and
optical-electronic conversions, RPSU to supply power for N2ROU and a Multi-Plexer to help
share multiple TX/RX signals through one antenna. It should have Power Cable for external
rectifier or to supply required power.
In addition,N2RDU can be inserted and removed to provide service for desired band (Optional).
3.1.2
N2ROU Power Cabling
N2ROU supports both of DC-48V and AC120V of input power. As RPSU for DC-48 and RPSU
for AC120V are separated from each other, you need to select one of them in case of purchase
order.
RPSU for DC -48V and RSPU for AC 120V have the same configuration and capacity while
each of the units uses different input voltage from each other.
