Solid State Logic SB 32.24, Руководство пользователя

Страница: 6 / 25

Network I/O Stagebox SB 32.24 User Guide Contents
Mains Power Connections
Each Stagebox includes redundant PSUs with IEC connectors; either supply can individually power
the unit. Ideally these should be connected to separate power circuits to provide redundancy of
incoming AC power.
●
PSU LEDs are informational and are green in normal operation.
●
A flashing red PSU LED indicates the failure of
​
PSU 1
●
A static red PSU LED indicates a failure of
​
PSU 2
Channel LEDs
●
Analogue signal LEDs (
​
SIG
​
) are green above -42 dBFS and red at -0.1 dBFS (clipping).
●
48V / ATT
​
indicates Phantom Power and/or Attention depending on red, green, or flashing
combinations as follows:
●
Red – phantom power on
●
Green flashing – channel Attention active
●
Green & red flashing – phantom power on &
channel Attention active
Note: The three holes above each of the XLR sockets are part of the unit’s ventilation. Do
not block (e.g. with tape!)
Page 6 of 25