Solid State Logic C10 HD Скачать руководство пользователя страница 146

Страница: 146 / 237

uicKroute

SSignmentS

The

io groups

display is also used to configure the Quickrouting lists which will be used by Preset-level users both for

selecting input channel sources and for selecting sources and destinations within the

routing

panel in the top right-

hand corner of the Touchscreen.

To select a Source for a Quickroute list:

‰

Ensure that the

io groups

display is displaying

Sources

‰

Select a Source which is to be added to a Quickroute list.

Note that multiple sources can be selected within the list.

‰

Press the

Quickroute

button, located under the

remove

button in the

io groups

display, and the

Select A

Quickroute

pop-up will appear:

‰

Touch Quickroute list to which the Source is to be added; the pop-up closes automatically.

‰

Select a new Source and repeat the process.

A pointing hand appears next to signals to indicate that they have been directed to a Quickroute list.

‰

To select a Destination, touch the

destinations

box in the top-left of the

io groups

display. Destinations are

then selected in exactly the same way as Sources.

Page 5-22

Section 5: System Administration

C10 HD Installation Manual

Route Menu

Содержание C10 HD














































































































































































































































Результаты поиска

Содержание C10 HD

Отзывы:

Solid State Logic C10 HD, Руководство по установке, Страница: 146 / 237

Результаты поиска

Содержание C10 HD

Отзывы: