Solid State Logic AWS DELTA 916 Скачать руководство пользователя страница 167

Страница: 167 / 239

DDITIONAL

TR F

UNCTIONS

TORING SETUPS

Setups can be stored at any time using the

STORE

soft key. This saves the current desk setup to the current title on the

SD memory card.

Setups can be renamed from the AWS Remote – see page 6-11

New setups are numbered starting at ‘1’. If a setup is deleted (see below) then its number will not be re-used. The only

exception to this is if all setups are deleted. The numbering will then restart from ‘1’.

ELETING

ETUPS

Setups can be deleted from memory by highlighting the setup up you wish to delete, holding down the

DELETE

soft key

and pressing the

CONFIRM

soft key.

ESTORING

EGACY

MIDI S

ETUPS FROM A

AC OR

For legacy purposes, it is possible to load setups which have been saved via a MIDI SysEx dump. The AWS uses MIDI port

4, or ipMIDI port 8, for loading mixes.
• Locate the DAW to just before the SysEx data containing the setups you wish to load.
• Press the

Load

soft key.

• Play through the SysEx block of data. As soon as the AWS detects the start of valid data it will delete all the current setups

and replace them with the stored ones from the MIDI track.

• The restored Setups can now be saved as part of a console Project using the AWS Remote - see Section 5 for more

details.

Because the Load process replaces your current setups with the ones stored on your Mac or PC you should check

you have saved any setups you wish to keep before loading new ones.

Note that when importing older AWS projects, TR elements which cannot be matched will prevent Auto Scan from

working properly.

Total Recall

AWS

elta

Owner’s Manual

Page 6-9

Содержание AWS DELTA 916
















































































































































































































































Результаты поиска

Содержание AWS DELTA 916

Отзывы:

Solid State Logic AWS DELTA 916, Руководство пользователя, Страница: 167 / 239

Результаты поиска

Содержание AWS DELTA 916

Отзывы: