Solfex DS-SB, Руководство пользователя

Страница: 1 / 2

The SOLFEX DS-SB provides the option to work with a remote temperature sensor.
When a compatible remote sensor is connected, the thermostat will automatically switch from
using it’s internal sensor to use the remote sensor instead. This function is ideal for controlling
being measured and controlled.
function automatically reduces the set temperature by 4°C when no time clock signal is detected.
The DS-SB thermostat has been designed to work in conjunction with the Heatmiser UH3 wiring
centre and TM4 Programmer, but can also be used as a standalone dial thermostat.
Wiring Diagram
DS-SB
Want More Information?
Call our support team on:
+44 (0)
directly on our website:
www.solfex
VGI
.co.uk
PDF FAQ
Rev 2.0
Introduction
Remote Sensor
Model: DS-SB
Installation
UH3
L N
1 2
SL
SL
RT+ RT-
N L
Remote Air
Sensor
ON
OFF
TIMER
IN ORDER TO AVOID ANY RISK OF ELECTRIC SHOCK, TURN OFF THE POWER TO THE HEATING
SYSTEM BEFORE COMMENCING INSTALLATION.
terminal driver into the slots on the bottom face of the thermostat.
2. Terminate the thermostat as shown in the wiring diagram.
3. Screw the back plate securely back onto the wall.
4. Clip the front part of the thermostat onto the back plate and turn the power back on.