INSTALLATION
4. Install Window Sliders
1) Measure the distance between the Hybrid AC and the window sash, cut window slider foams to length by
using a utility knife so that it fits inside the opening. (See Fig.5)
2) Slide window slider foams into both support brackets on either side of the Hybrid Air Conditioner. (See
Fig.6)
5. Attach Top Foam Sealer
1)
Measure the total width of the installation including the window sliders
2)
Cut the top foam sealer to length
3)
Remove adhesive from the top foam sealer
4)
Attach the top foam sealer to the top of the Hybrid Air Conditioner and
window sliders directly below the window sash
5)
Close the window sash and seal.
6. Plug in Hybrid Air Conditioner and Power ON
Fig.5
Fig.6
Fig.7
END OF SEASON
Remove the Air Conditioner from the Window (End of Season)
1.
Turn the air conditioner off, and disconnect the power cord.
2.
Remove the window sliders from either side of the air conditioner.
3.
Using a drain pan, unplug the drain plug on the front bottom of the unit to drain any condensation water
in the base of unit.
4.
Keeping a firm grip on air conditioner, lift up and remove the air conditioner from the window and
sill.
5.
Store parts with the air conditioner in the box.
Single and Double Hung Windows
SECURITY BRACKET
Optional Security Bracket Installation
Your Window Kit also includes an optional security
bracket that can be installed to prevent the window
from being opened from the outside while a Window
Kit is installed.
