1
2
REMOTE CONTROL OPERATING INSTRUCTIONS
1)
Power On and Off
- If the unit is already on, press the
POWER
button on the remote while
pointing the remote away from the unit. This will turn the remote on. If the unit is off, now press the
POWER
button once to manually turn the unit on. Press the
POWER
button once more to turn the
unit off. When in Air Conditioner mode, the selected temperature will appear on the remote control
LCD display. When the unit is in Fan mode, Dehumidifier mode and Auto mode, you will not see any-
thing displayed instead of the set temperature. This shows that temperature selection is not available
when the unit is in Fan mode, Dehumidifier mode, and Auto mode.
2)
Mode Selection
- Press the
MODE
Button repeatedly to cycle between the different modes: Air
Conditioner, Dehumidifier, Fan-Only mode, and Auto. The left side of the remote control LCD display
will light up showing which mode is selected. An arrow ◄ will display next to the mode that is se-
lected, indicating which mode the unit is currently operating in.
3)
Fan Speed
- Press the
FAN
speed button to cycle through high, medium, low, and auto fan speeds.
The display on the remote control will show an arrow ► by the current fan speed on the remote control
LCD display. When the unit is in Air Conditioner mode and Auto mode, the fan speeds will cycle
through in this order: High, Medium, Low, Auto. When the unit is in Dehumidifier mode, the fan
speeds will only in auto fan speed. When the unit is in Fan mode, the fan speeds will cycle through in
this order: High, Medium, Low. Each change in speed will be associated with a “beep” sound from the
unit.
4)
Temperature Setting
- When the unit is in Air Conditioner mode you can select your desired tem-
perature. Press the ▲ or ▼ to select your desired temperature setting. The temperature on the LCD dis-
play on the remote control will increase or decrease accordingly. Pressing the
°C
/
°F
button will change
the temperature select between °C and °F.
5)
SLEEP MODE
- To set Sleep mode, make sure the unit is in Air Conditioner mode, Dehumidifying
mode or Auto mode. Press the
SLEEP
Button on the remote control, the remote control will show an
arrow ▲ under the “SLEEP” icon on the remote control LCD display. When in
SLEEP
mode, the fan
will run on low to keep fan noise at a minimum. The temperature setting will gradually increase to 1°F
above the original set temperature for each of first 2 hours. The unit will keep operating the same tem-
perature for 6 hours and switch to standby mode.
6)
TIMER
-
Auto-On:
To program the timer, when the unit is off, point the remote at the unit and press the
TIMER
button. Once
TIMER
is pressed, the arrow ▼ will display above the TIMER ON icon on the remote
control LCD display as standby mode. Press the arrow buttons ▲ or ▼ to set the timer. The timer can
be set in intervals of 0.5 hours up to 10 hours, then in intervals of 1 hour up to 24 hours. Once the de-
sired time is selected, press the
TIMER
button once more to set it. The arrow ▼ will display above the
TIMER ON icon on the remote control LCD display to indicate that the timer has been set.
Auto-Off:
While the unit is operating, point the remote at the unit and press the
TIMER
button. Once
the
TIMER
is pressed, the arrow ▼ will display above the TIMER OFF icon on the remote control
LCD display. Press the arrow buttons ▲ or ▼ to set the timer. The timer can be set in intervals of 0.5
hours up to 10 hours, then in intervals of 1 hour up to 24 hours. Once the desired time is selected, press
the
TIMER
button once more to set it. The arrow ▼ will display above the TIMER OFF icon on the
remote control LCD display to indicate that the timer has been set.
Содержание TM-PAC-08E3
Страница 8: ...8 WINDOW KIT INSTALLATION ...