12
Auto Mode
1) Install the exhaust hoses and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
button on the control panel.
4) Press the
MODE
button until the “
” icon appears on the control panel display. Select the fan speed
by pressing the
FAN SPEED
button.
NOTE:
During AUTO mode, the unit operates in
Heating
mode when the room temperature is below 68
°
F,
Dehumidifier
mode when the room temperature is between 68
°
F to 80
°
F. And
Air Conditioner
mode when
the room temperature is above 80
°
F.
Sleep Mode
(This mode can only be selected when using the Remote control )
1) To set Sleep mode, make sure the unit is in Air Conditioner mode.
2) Press the
SLEEP
Button on the remote control. The “
” icon appears on the control panel display.
3) When in
SLEEP
mode, the fan will run on low to keep fan noise at a minimum.
4) When in Air Conditioner mode, the temperature setting will gradually increase to 2
°
F above the original set
temperature for 6 hours. After 6 hours the temperature setting will return to the set temperature.
5) When in Heating mode, the temperature setting will gradually decrease to 2
°
F below the original set tem-
perature for 6 hours. After 6 hours, the temperature setting will return to the set temperature.
6) When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.
Air Purifier Mode - See Page 13
Compressor Indicator
The
icon will light up on the control panel display when the compressor turns on. The
icon will
turn off when the compressor shuts off.
