background image

 

10

CONTROL PANEL FUNCTIONS 

 

ON/OFF BUTTON

 

Starts or stops the unit.   

MODE BUTTON

 

Press to select the operating mode:   
Fan Mode 
Air Conditioning Mode 
Heating Mode 
Dehumidifying Mode 
Auto Mode 

FAN BUTTON

 

Press to select the fan speed: High, Medium, and Low. 
The fan speed can be visually distinguished by the number of the digital air segments (follow arrow 
above) flow out from the windmill fan image on the multi-color display.

 

TEMPERATURE

 

When in cooling or heating mode, the desired temperature can be selected by pressing the 

 and 

 

buttons. The multi-color display flashes the temperature while it is being set. The multi-color display 
shows the set temperature when it is not in temperature setting mode.   

The multi-color display can show either Celsius or Fahrenheit.  Press the 

 and 

 buttons 

simultaneously to change the display from Celsius to Fahrenheit or vice versa.   

TIMER

 

To set the auto start time, press the Timer on button until the multi-color display shows a flashing 

”.  Press the 

 and 

  buttons to change the clock to the desired time for the unit to 

automatically start.    To set the auto stop time, press the Timer Off button and the multi-color display 

will show a flashing “

”.  Press the 

 and 

 buttons to change the clock to the desired time 

for the unit to automatically stop.  The light will flash for 3 seconds to activate the timer you 
programmed.  

TIME DISPLAY

In the diagram above, the letter “J” points to the adjustable time display. To adjust the time, Press FAN, 
SPEED and SWING together (at the same time), then press UP to adjust the hours, and press DOWN 
to adjust the minutes.   
 

SWING

 

To start horizontal oscillation, press the Swing button once. ‘

’ icon will appear on the multi-color 

display. To stop oscillation, press the Swing button again. Vertical air flow direction can be adjusted 
manually.

       

 
 

OPERATION USING THE CONTROL PANEL 

 

COOLING  

1.

 

Properly install the exhaust hoses. 

2.

 

Plug the power cord into a grounded outlet. 

3.

 

Turn on the unit by pressing the On/Off button on the control panel. 

4.

 

Press the Mode button until “

” icon appears on the multi-color display. 

5.

 

Press the 

 or 

 buttons until the desired temperature appears on the multi-color 

display. The temperature ranges from 61

°

F - 88

°

F (16

°

C - 31

°

C). 

6.

 

Select the fan speed by pressing the Fan button. 

NOTE

: During hot days, the unit will cool off the room most efficiently by setting the temperature at 

Содержание KY-34


















Отзывы: