Soleus Air KFR-12G, Инструкция по установке и эксплуатации

Страница: 22 / 32

Suppport plate
Hook
Hook
Mounting the Indoor unit to the Mounting Plate:
l Hook the indoor unit onto the upper portion of the mounting plate by connecting the hooks at the
rear top of the indoor unit with the upper edge of the mounting plate.
l To ensure that the hooks are properly seated on the mounting plate, check if the unit can slide
by moving it to the left and right. If the unit moves, it is not properly seated.
l A unit support plate in the mounting plate can be used if the unit is on a slanted wall and can
also be used to ease the connection of the refrigeration lines.
l Affix the screw underneath the unit to the mounting plated after completed with installation.
Connection of condensate drain extension line:
l Place glue on the end of the drain line extension end.
l Fully insert the end of the drain line to the extension line. Make sure it is properly inserted to no less than 3/8 of an inch so that water
does not leak from the hose.
- 20 -