background image

IMPORTANT SAFETY INSTRUCTIONS 

 3 

 

Read all instructions before using this air conditioner 

 

FOR YOUR SAFETY 

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read 
product labels for flammability and other warnings. 

 

ACCIDENT PREVENTION 

To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions, 
including the following: 

• 

Be sure the electrical service is adequate for the model you have chosen. This information can be found on the     
rating label located on the side of the cabinet or behind the grille. 

• 

If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass prior to  
installation. If the windows is a triple-track type with a screen panel included, remove the screen completely before 
installation. 

• 

Be sure the air conditioner has been securely and correctly installed according to the installation instructions        
provided with this manual. Save this manual and the installation instructions for future use when removing and           
reinstalling the unit. 

• 

When handling the air conditioner, be careful to avoid cuts form sharp metal fins on the front and rear coils. 

NOTE: 

The power supply cord on this air conditioner contains a current detec-

tion device designed to reduce the risk of fire. Please refer to the section “Operation of  

Current Device” for details. In the event that the power supply cord is damaged, it      

cannot be repaired it must be replaced with a cord from Soleus Air Powered by Gree.

 

ELECTRICAL INFORMATION 

The complete electrical rating of your new air conditioner is 
stated on the product rating label located on the unit. Refer to the 
ratings on the label when checking electrical requirements. 

• 

Be sure the air conditioner is properly grounded. To minimize 
shock and fire hazards, proper grounding is important. The 
power cord is equipped with a three-prong grounded plug for 
protection against shock hazards. 

• 

Your air conditioner must be used in a properly grounded 
wall receptacle. If the wall receptacle you intend to use is not 
adequately grounded or protected by a time delay fuse or 
circuit breaker, a qualified electrician will have to install the 
proper receptacle. 

• 

Do not run the air conditioner with a protective cover on the 
outside of the unit. This could result in mechanical damage 
within the air conditioner. 

• 

Do not use an extension cord or an adapter plug. 

Содержание GB-TTW-10ESE
















Отзывы: