Cautions
1.
In any case the compressor will restart 3 minutes after power failure
2.
The air-conditioner adopts three core plugs:
Modification will void warranty
3.
Working voltage of the air-conditioner must keep within the range of 115VAC
±
10. If the
voltage is too high or low will lead to damage of the compressor.
4.
The normal working environment temperature of the air conditioner is: 0F to115F
Maintenance and Safeguard
It will keep at maximum performance ratings if you perform routine maintenance. After running
for 90 days, you must clean up dust around the fins of the heat exchanger in order to keep
refrigeration performance at optimum
TROUBLE SHOOT CHART
Problem Possible
Cause
Solution
Doesn’t cool / heat
1.
The voltage of the power
is lower than 97V
2.
You are using an
extension cord for the unit
3.
The system leaks Fluorine
4.
Button “ON/OFF” failure
5.
Set the temperature to the
abnormal position.
6.
Compressor not working.
7.
The sub cooling of
compressor is protected
and does not work
8.
Capillary is blocked
Adjust the voltage range into
normal demand.
Do not use an extension cord.
Call repair technician
Replace button “ON/OFF”.
Refer to operation explanation.
Turn off for ten minutes. Turn
back on
Call repair technician
Call repair technician
Inadequate cooling
1.
The evaporator and/or
condenser are blocked by
debis
.
2.
The doors and windows
have opened frequently.
3.
Heat load is too high.
4.
Set temperature is in
improper position.
5.
Capillary is blocked.
6.
The refrigeration system
has failed.
Clean the evaporator and
condenser.
Reduce times that open the
door.
Installation of larger unit.
Adjust the set value.
Call repair technician
Call repair technician
6
