SOLENICA Caia, Руководство пользователя

Страница: 9 / 15

9
STEP 3 | Pointing
& Turning CAIA On
Gently place CAIA in your chosen spot. CAIA’s mirror
and Sunlight Pointer must be under direct sunlight
and with a direct line of access to the spot where
you want to reflect the light to. Use the Sunlight
Pointer to set the direction of the reflected light.
You can adjust the height of the reflected beam by
sliding the lower arch up and down, through the base.
To switch her on, using two fingers, apply light
pressure on the touch button for 2 seconds. She will
immediately start scanning (the scan may take up
to a few minutes).
CAIA will find her best position and autonomously
make micro-adjustments throughout the day. As
long as she’s under direct sunlight, CAIA will keep
pointing in the same direction.
None of this is happening? Check out our
troubleshooting guide below.
STEP 1 | Removing CAIA
from the box
Once you carefully open the box, gently lift CAIA
placing both hands on the top arc to lift her up; then
fit her onto the add-on base.
NEVER MOVE/SWIVEL THE MIRROR OR ITS ROUND
CASING BY HAND!
STEP 2 | Charging CAIA
Place CAIA under direct sunlight, with the solar
panel facing the sun, for at least one day.