18
Read all of these instructions, cautions, and warnings for the Solec-
tria PVI inverter and associated PV array documentation.
Installation and commissioning must be performed by a licensed
electrician in accordance with local, state, and National Electrical
Code ANSI/NFPA 70 requirements.
The installation and wiring methods used in the installation of this
inverter in the U.S. must comply with all US National Electric Code
requirements (NEC) and local Authority Having Jurisdiction (AHJ)
inspector requirements. In Canada, the installation and wiring
methods used must comply with the Canadian Electric Code, parts
I and II, and the local AHJ inspector requirements. System groun-
ding when required by the Canadian Electrical Code, Part 1, is the
responsibility of the installer.
These servicing instructions are for use by qualified personnel only.
To reduce the risk of electric shock, refer all servicing to factory
qualified service personnel. No user service parts are contained
inside the inverter.
The secondary short-circuit current rating is increased at the trans-
fer connection point to the public electricity supply system by the
nominal current of the connected inverter.
To reduce the risk of fire, connect only to a circuit provided with
branch circuit overcurrent protection in accordance with the Natio-
nal Electrical Code, ANSI/NFPA70.
The unit or system is provided with fixed trip limits and shall not be
aggregated above 30KW on a single point of common connection.
In order to be able to carry out an energy measurement, a revenue
meter kWh must be attached between the networks feed-in point
and the inverter.
3
Installation
WARNING!
AVERTISSEMENT!
WARNING!
AVERTISSEMENT!
WARNING!
AVERTISSEMENT!
INFORMATION!
INFORMATIONS!
WARNING!
AVERTISSEMENT!
CAUTION!
PRUDENCE!
CAUTION!
PRUDENCE!
CAUTION!
PRUDENCE!
Содержание PVI 3800TL
Страница 1: ...PVI 3800TL PVI 5200TL PVI 6600TL PVI 7600TL Installation and Operation manual for ...
Страница 92: ...91 ...