8
#68
. 5/16” x 5/8”
Hex Head Bolt (8 pcs)
#76
. 5/16” x 18 x 1.5T
Flat Washer (6 pcs)
#82
. 5/16” x 1.5T
Split Washer (2 pcs)
#83
. 5/16” x 19 x 1.5T
Curved Washer (2 pcs)
1.
Slide the Console Mast Cover (
31
) onto the Console Mast (
2
). Make sure the plastic cover
is in the correct orientation.
2.
Feed the twist tie that is connected to the Computer Cable (
44
) and Hand pulse Cable (
45
)
through the bottom of the Console Mast (
2
) and out through the opening at the top.
3.
Insert the Console Mast (
2
) into the receiving tube (make sure it is oriented like the
illustration; be careful not to pinch the cables between the tubes, as damage to the
electronics could occur) of the Main Frame (
1
) with six Hex Head Bolts (
68
), four Flat
Washers (
76
) on the sides of the tube and two Curved Washers (
83
) on the front of the
tube. Tighten using the 12/14mm Wrench (
112
).
4.
Remove the white Styrofoam pad (factory installed to prevent bolts from being accidentally
dropped into the Bike).
5.
Remove the plastic tie that holds the plastic cover on the center of the handlebar (
3
).
Attach the Console Mast Handle bar Assembly (
3
) onto the Console Mast (
2
) with two Hex
Head Bolts (
68
), two Flat Washers (
76
) and two Split Washers (
82
) using the 12/14mm
Wrench (
112
).
3
CONSOLE
MAST
HARDWARE
STEP
3
Содержание Exercise Bike
Страница 25: ...24 EXPLODED VIEW DIAGRAM O P T I O N A L ...