Dyaco Canada Inc. 2013
12
#120
. M5 x 15mm
Phillips Head Screw
(4 pcs)
#122
. Ø3.5 x 12mm
Sheet Metal Screw
(6 pcs)
4
PLASTIC
PARTS
HARDWARE STEP 4
1.
Attach front (
89
) and rear (
90
) Handle Bar Covers together on left Swing Arm
shaft, and secure using two Sheet Metal Screws (
122
) and the Phillips Head
Screw Driver (
150
). Repeat this process on the right side with Handle Bar
Covers
(
91
) and (
92
).
2.
Install Console Mast Covers (L & R) (
81
&
82
) on each side of the Side Cases
and
secure with two Sheet Metal Screws (
122
) and the Phillips Head Screw
Driver
(
150
).
3.
Secure left Slide Wheel Cover (
87
) on left Pedal Arm with two Phillips Head
Screws (
120
) and the Phillips Head Screw Driver (
150
). Repeat this process for
the right Slide Wheel Cover (
88
).
4.
Snap Rear Bar Cover (
97
) into the hole on the Incline Rail Assembly.
ASSEMBLY
STEP
4
ELLIPTICAL
FEATURES
INCLINE ADJUSTMENT
There is an incline feature that will further increase the variety of your workouts.
When the incline is at its lowest position you get a normal elliptical workout. As the
incline increases you will feel your knees rise higher with each step; which means you
are involving more muscle fibers, due to the increased range of motion.
This model has a computer controlled power incline. The power incline is controlled by
buttons on the console, and will automatically adjust via the incline motor during the
built-in workout program.