Sole Fitness 16808091000, Руководство пользователя, Страница: 5 / 16

Customer service: 1-888-707-1880 Dyaco Canada Inc 2020
Email: customerservice@dyaco.ca
4
FACILITY SAFETY PRECAUTIONS
• Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
• Make sure that each bench is set up and operated on a solid level surface. Do not
install equipment on an uneven surface.
• Make sure that all users are properly trained on how to use the equipment.
• Make sure there is enough room for safe access and operation of the equipment.
• Perform regular maintenance checks on the equipment. Also pay close attention to all
areas must susceptible to wear.
• Immediately replace worn or damaged components. If unable to immediately
replace worn or damaged components, then remove from service until the repair is
made.
• Use only Dyaco Canada supplied components to maintain/repair the equipment.
• Keep a repair log of all maintenance activities.
NOTE: It is the sole responsibility of the user/owner or the facility operator to ensure that regular
maintenance is performed
SAFETY GUIDELINES AND PRACTICES
Dyaco Canada recommends that all fitness equipment be used in a supervised area. It
is recommended that the equipment be located in an access-controlled area. Control is
the responsibility of the owner. The extent of control is at the discretion of the owner.
It is the responsibility of the purchaser/user of Dyaco Canada products to read and
understand the owner’s manual, and warning labels; as well as instruct all individuals,
whether end users or supervising personnel, on proper usage of the equipment.
PROPER USAGE
Use bench only as described in the manual. Failing to follow proper instructions may
result in injury.
• Do not lean against or pull on the framework or any component, whether bench is at rest
or in use. Inappropriate or improper use may result in injury to users or third parties
(bystanders).
• Do not use bench if it is not located on a solid level surface or is improperly
installed.
• Provide an adequate safety perimeter between the bench, walls and other equipment to
ensure that the facility has the proper clearance for usage and training.