I
III
II
Quick Installation Guide
X1 Series 3.0KW-5.0KW
Packing List
Inverter Installation
PV Connection
X1 Series X 1
Bracket X 1
Screw package:
Expansion tube X 3
Expansion tube X 3
Male DC connector X 2
Female DC connector X 2
AC connector X 1
Note:
Please refer to the appropriate instruction manual for the usage of optional accessories.
User manual X 1
Earth terminal X 1
Quick installation guide X1
X1 Series 3.0KW-5.0KW
Pocket WiFi X 1(Optional)
Meter X 1(Optional)
Smart plug X 1(Optional)
- Mark the position of three holes
- Drill holes with φ6 drill.
- Depth: at least 50mm.
- Tighten the expansion tubes.
- Screw the expansion screws.
- Match the inverter with the bracket.
- Screw the cross recessed screw on the right side.
12 AWG
Cable size: 12 AWG
trip length:
6.0mm
-Align the four halves connectors.
positive DC
pin contact
male plug
Warranty card X 1
Positive DC pin contact
×
2
Negative DC pin contact
×
2
negative DC
pin contact
clamp contact
nut
female plug
tight nut
cable
Inverter
PV array
PV1
PV2
+
-
+
-
+
-
+
-
+
-
Note!
The PV connection
mode as the diagram
shown is
not allowed!
Waterproof connector with RJ45
X 2
×
torque:1.2±0.1Nm
torque:1.2±0.1Nm
torque:1.5
±
0.2Nm