notification bar.
l
If you have currently configured a scheduled discovery, results display in the
notification bar when the discovery completes.
l
If you are currently using SolarWinds UDT to monitor any VMware ESX or
ESXi Servers, the notification bar can display messages communicating the
number of ESX nodes found during any discovery, and, if any discovered ESX
nodes require credentials, the notification bar tells you. For more information
about managing ESX Servers, see “Virtualization” in the SolarWinds Orion
Network Performance Monitor Administrator Guide.
For more information about any displayed notification bar message, click
More
Details
and a web console view relevant to the displayed message opens.
To delete a posted message, either click
Dismiss Message
next to the displayed
message, or properly address the situation mentioned in the posted notification.
To remove the notification bar from your web console, click Close (
X
) at the right
end of the notification bar.
Managing all the monitored devices on your network is greatly simplified with the
Node Management feature of the Orion Web Console. Using this tool, you can
easily add and remove devices and quickly view and edit device properties. Any
user that has been granted node management rights can directly access the
Node Management tool either from any All Nodes resource or through the Orion
Website Administration page.
The following sections describe the various functions that allow you to view and
manage all your network devices from the Orion Web Console.
Note:
The Node Management feature is accessible by clicking
Manage Nodes
either in the header of any All Nodes resource or in the Node and Group
Management grouping of the Orion Website Administration page. The All Nodes
resource is included on the Orion Summary Home view by default, but you can
include it on any other web console view as well. Confirm that the All Nodes
resource is available on an appropriate Web Console view before continuing.
Editing Object Properties
The following procedure provides the steps required to edit monitored object
properties using the Node Management utility of the Orion Web Console.
To edit object properties in the Orion Web Console:
91
Editing Object Properties
