1. Log in to the Orion Web Console as an administrator.
2. Click
Settings
in the top right of the web console.
3. Click
Orion Thresholds
in the Settings group of the Orion Website
Administration page.
4. Provide appropriate values for
Error Level
,
High Level
, or
Warning Level
for selected thresholds.
Using the Orion Web Console Message Center
The Message Center provides a single, customizable view in the web console
where, in a single table, you can review all events, alerts, traps and Syslog
messages on your network.
To view and configure the Message Center:
1. Click
Home > Message Center
.
2.
If you only want to see messages for specific devices,
select
appropriate device properties in the Filter Devices area.
3. In the Filter Messages area, select the
Time period
for the messages you
want to review, and then provide the number of messages you want to
show.
4.
If you want to show all messages, Including messages that have been
acknowledged,
check
Show acknowledged
in the Filter Messages area.
5.
If you only want to see certain types of messages,
filter messages as
shown in the following steps:
a.
If you want to view alerts,
confirm that
Show
triggered alerts
is checked, and then select the type
of alerts to display.
b.
If you want to view event messages,
confirm that
Show event messages
is checked, and then select
the type of events to display.
c.
If you want to view Syslog messages,
confirm that
Show syslog messages
is checked, and then select
103
Using the Orion Web Console Message Center
