AZ-TM-PMS-0949, Rev. 001
Seite 6 / 9
The topmost (30th) panel is positioned with
frontside (sunny side) up.
3.2 Instruction for Lashing of Package Piece
Version 1:
Lash the package using the PE straps and appropriate mashinery
Place the edge protectors, 2 pc. per package
corner as shown in the figure respectively in
accordance to the number of used straps
CAUTION! DO NOT PLACE STRAPS
CENTRIC
ON THE LONG SIDE
Place 2 straps upright at the long and short
sides close to the palette outer blocks
The straps have to be applied tightly (tension
force app. 2000N), without damaging the
panels
-
CAUTION! THE PET STRAP HAS TO BE
APPLIED WITHOUT DISTORTION
For Weldable Straps
-
CAUTION! THE STRAPS HAVE TO BE
WELDED FLUSH WITH EACH OTHER
(REGARDING THE STRAPS WIDTH), AN
OVERLAPPING OF MORE THAN 10%
OF THE STRAPS WIDTH (NOT BONDED
AREA) IS NOT ALLOWED, THE BONDED
AREA MUST EXHIBIT AN SUFFICIENT
SIZE
