AZ-TM-PMS-0949, Rev. 001
Seite 5 / 9
3 Packaging Instruction
3.1 Step by Step Instructions for Packing Piece Assembly
Check palette regarding obvious damage
before usage
Place the palette on a plane and stable
surface, consider necessary space for
handling and final transport
Place the corrugated cardboard underlay
centered on the palette. (flush with the palette)
Place the solar panel with the front side
(sunny side) towards the palette on the
cardboard under-lay, the module has to be
positioned centrically on the palette allowing
an even circumferential overlap of the palette
edge
Put 6 foam pads on the panel frame in accor-
dance to scheme shown in the figure (2 pc. at
the each long side, 1 pc. at each short side)
Position 4
„QuickStaxx“ stacking devises at
each panel edge.
Continue stacking further panels on top of
others, always placing foam washers and
stacking devises. A maximum number of
30
panels
are allowed per palette.
