SolarMax 10 005 380, Руководство по установке

Страница: 27 / 32

en
27
6 Replacement
6�1 I/O module disassembly
DANGER!
Fatal electric shock hazard!
■ ■
Never open the inverter while it is in operation.
■ ■
Before you start installation work, ensure that all connectors and cables
are de-energized.
■ ■
Remove the cover and the contact protection on the inverter as described
in the instruction manual.
■ ■
Observe the safety instructions in the inverter instruction manual.
Procedure
1. Open the inverter as described in the instruction manual.
2. Use a voltage tester to check that all connections at the inverter and I/O module are
de-energized.
3. Remove all conductors connected to the I/O module.
4. Remove the 2 fixing screws.
5. Pull the I/O module out of the slot.
6. Close the inverter by
– engaging the contact protection;
– then tighten the cover.
6�2 I/O module disposal
Dispose of the I/O module as indicated by the local waste disposal regulations.