SAFETY, INSTALLATION, AND OPERATIONS MANUAL
© The Solaria Corporation
Contents subject to change without notice.
U.S. and International patents issued and pending
Document PSC-0004 Rev 02, November 2010
3 of 12
▲
Do not attempt to repair any part of the modules. There are no user serviceable
parts within the modules.
▲
Before installing your system, contact local authorities to determine the necessary permit,
installation, and inspection requirements.
▲
Ensure module support structures are wind rated per local code and approved for use by the local
authorities.
▲
Ensure all installations are performed in compliance with local, regional, national, and
international statutory regulations, guidelines, norms, and code requirements.
▲
Ensure all installations are performed by authorized personnel only.
2.2.
FIRE SAFETY
Solaria modules are Class C fire rated and certified by an independent third party testing
laboratory.
OBSERVE THE FOLLOWING PRECAUTIONS TO AVOID FIRE HAZARDS
▲
Refer to your local authority for guidelines and requirements for building and structural fire safety.
▲
The roof construction and installation may affect the fire safety of your building, and improper
installation may contribute to hazards in the event of fire.
▲
Do not use roof top open rack fixed tilt mountings. Solaria modules are not designed for these
mountings.
▲
Note that it may be necessary to use components such as earth fault circuit breakers, fuses, and
circuit breakers.
▲
Do not use modules near equipment or locations where flammable gases can be generated or collect.
▲
Do not direct additional, artificially concentrated sunlight on modules.
2.3.
ELECTRICAL SAFETY
Contact with a DC voltage of 30V or more can be hazardous.
OBSERVE THE FOLLOWING PRECAUTIONS TO AVOID ELECTRICAL HAZARDS
▲
Do not use modules of different electrical or physical configurations in the same system
or array.
▲
If total DC voltage exceeds 100V, ensure the system is installed, commissioned, and maintained by
a licensed electrician unless local electrical codes determine otherwise.
4-color
2-color
1-color
4-color
1-color
