SOLARFOCUS Vampair, Руководство по установке

Страница: 3 / 52

1 About this manual
1 About this manual
Language
The language of the original manual is German. Ver-
sions of this manual in all other languages are trans-
lations of the original.
Storage
Keep the manual for the entire service life of the pro-
duct and ready to hand. The manual must be passed
on to the new owner when the product is dis-
mantled/reused. If the manual is lost or destroyed,
request a new copy from the manufacturer.
Instructions and warnings
The instructions used in this manual are highlighted
with symbols and signal words. The signal word indi-
cates the level and nature of the danger.
i
Indicates information for correct handling of
the product.
!
CAUTION - Material damage is possible if
these instructions are not complied with.
DANGER - Failure to comply with this instruc-
tion poses a danger to people.
1.1 Limitation of liability
SOLARFOCUS GmbH assumes no liability for injury
or material damage resulting from:
–
Failure to observe the instructions in this manual.
–
Use of the product for any purpose other than for
its intended use.
–
Deployment of unqualified personnel.
–
Use of non-approved spare parts.
–
Technical modification of the product by the sys-
tem operator.
Warranty, guarantee
See General Terms of Business and Delivery Con-
ditions of SOLARFOCUS GmbH.
Manufacturer
SOLARFOCUS GmbH
Werkstrasse 1, A-4451 St.Ulrich
Company register no. 281755x
Tel.: +43 7252 50 002-0, Fax: +43 7252 50 002-10
office@solarfocus.com
www.solarfocus.com
Service Hotline
–
Email: service@solarfocus.at
2 Safety information
Installation and commissioning
–
Heat pump may only be installed and put into
operation by certified qualified personnel
(SOLARFOCUS service technician or
SOLARFOCUS service partner).
–
Install heat pump outdoors only.
–
Never disconnect the heat pump from the power
supply (except electrical work). Otherwise risk of
frost damage
Maintenance and repair
–
Have repairs done by qualified personnel only
Improper repairs can lead to risks for the user and
inefficient operating conditions.
–
Use original spare parts only
Handling of refrigerant R410A
–
The heat pump uses refrigerant R410A. Work on
the cooling circuit may be performed only by a
qualified refrigerant electrician.
–
Wear suitable gloves and goggles when working
with refrigerant.
What to do in case of escaping refrigerant
–
Escaping refrigerant
[1]
can cause frostbite if it tou-
ches the exit point. If refrigerant escapes do not
touch any components of the heat pump.
[1] Recognizable by oily residue, which is left when exiting.
–
Avoid skin or eye contact with the refrigerant. In
case of skin or eye contact with the refrigerant, a
doctor should be consulted.
–
Switch off heat pump, Contact qualified per-
sonnel.
3 Technical requirements
3.1 Warranty, guarantee, liability
Guarantee claims are valid as part of a heat pump
maintenance agreement.
3.1.1 Technical requirements for warranty
and guarantee claims
The following technical requirements must be obser-
ved as a precondition for a warranty and guarantee
claim.
Installation manual vampair 3