SOLARFOCUS Vampair, Руководство по установке

Страница: 25 / 52

6 Install electric heating element
Seal the underground waste pipe
►
Seal the annular space 1 of the underground
waste pipe at both pipe ends such that it is dif-
fusion-resistant (e.g. use PU-foam (water-resi-
stant)), note: Mineral wool or granulate/filling
material are not diffusion-resistant).
Abb. 2-31
7.4.3.3 Rear connection set
–
For connection of the primary circuit lines intro-
duced from the rear.
–
Art. no. 25107
Vent valve 1
Abb. 2-32
Abb. 2-33: Components of rear connection set
Seal insulation
►
Stick fabric tape on insulation parts at the col-
lision point
7.4.3.4 Rear connection set - 3 m long extension
–
Art. 25108
–
Used to extend the rear connection set (Art.
25107). For connecting the rear connection set
with the flow and return of the building installation.
i –
Protect the cables on site against wea-
thering and damage.
–
Connecting cable and cable conduit must
be sealed so they are diffusion-resistant
and thermally-insulating
> 29
Abb. 2-34
Installation manual vampair 25