SOLARFOCUS Vampair, Руководство по установке

Страница: 4 / 52

1 About this manual
Regular maintenance
–
Have the heat pump serviced annually by qua-
lified personnel
Specifications for the heating system's fill-up/-
make-up water
–
Check pH value: this must be in the range of
8.2 to 9.5
–
Avoiding scale buildup > 7 (=limescale on heat
exchanger surfaces):
–
Take the water hardness into account
–
Soften the fill-up water, or better: desalinate it.
–
Avoiding water-side corrosion > 7 (is triggered by
the oxygen in the water):
–
Correct system planning, correct dimen-
sioning, take material combinations into
account.
–
Repair leaks immediately.
–
Expansion tank > 8 (prevents air from being
drawn in when the system cools down): Cor-
rectly set the pressure, check it regularly.
–
Existing underfloor heating: Take care with
old, diffusion-open plastic pipes
> 9
3.1.2 Conditions for claims
For warranty and guarantee claims observe the fol-
lowing points:
–
The warranty begins at the time at the time of han-
dover (delivery note, commissioning log).
–
The guarantee period is calculated from the date
of initial commissioning (according to the control's
operating hour counter).
–
The warranty periods are based on the relevant
regulations.
–
We must be notified promptly and accurately of
any damage incurred, so that the cause can be
clarified.
–
If the system has defects despite correct instal-
lation (in compliance with the technical docu-
mentation), we grant a warranty provided that the
system has been examined by the plant customer
service (commissioning log).
–
The guarantee applies to technical, construction-
related faults and faults in the manufacture of the
system that prevent correct and problem-free
usage.
–
We are not liable for parts that were not produced
by SOLARFOCUS. However, we are prepared to
transfer our existing claims against the producer
(relating to this defect) to the buyer.
–
In fulfilling the warranty/guarantee services, we
shall cover only the assembly time and the mate-
rials used, but not any travel or accommodation
costs necessary for the fitters/engineers or any
return transport costs.
–
SOLARFOCUS GmbH assumes no liability for
any consequential costs of damages.
–
The repair and/or warranty replacement shall be
carried out on site or in the SOLARFOCUS fac-
tory at our discretion.
–
The company SOLARFOCUS will determine whe-
ther such work requires a repair or whether the
parts are to be replaced free of charge.
3.1.3 Claims rendered void
The warranty and guarantee claims are rendered
void if one of the following points applies:
–
Non-compliance with the technical requirements
> 3
–
Damage during transport.
–
Wilful damage.
–
Damage due to force majeure (water, fire, etc.).
–
Non-observance of information in the planning,
installation and operation manual.
–
Insufficient energy or water, fault in the hydrau-
lics.
–
Incorrect operation, failure to perform main-
tenance and cleaning as prescribed.
–
Commissioning and maintenance carried out by
non-certified companies.
–
Undocumented commissioning (no com-
missioning log) and/or maintenance (main-
tenance log).
–
It is almost impossible to produce flawless pain-
ted parts; for this reason, slight defects that do not
adversely affect proper use shall not be deemed
as grounds for complaint.
–
No claims can be ß under the warranty if unaut-
horised intervention (or action that has not been
explicitly approved by us the manufacturer) has
been carried out. In addition, the goods must be
paid for within the specified payment timeframe.
3.1.4 Limitation of liability
SOLARFOCUS GmbH assumes no liability for injury
or material damage resulting from:
–
Failure to observe the instructions in this manual.
–
Use of the product for any purpose other than for
its intended use.
–
Deployment of unqualified personnel.
–
Use of non-approved spare parts.
–
Technical modification of the product by the sys-
tem operator.
4 Installation manual vampair