5 Installation
6.2 Position of the servomotor on the
mixer
When removing and fitting the servomotor, make
sure that the bevel in the metal ring
1
(on the back of
the servomotor) coincides with the bevel
2
on the
mixer shaft.
Abb. 2-26: Aligning the bevel with the bevel
Position of the mixer shaft
Abb. 2-27: Adjust the mixer shafts in this position
Servomotor installation position
Abb. 2-28: Fit the servomotors in this position
Servomotor setting position
Abb. 2-29: Set the servomotor like so
24
Installation manual
pelletelegance
