SOLARFOCUS Pelletel Egance 10, Руководство по эксплуатации

Страница: 5 / 48

4 Product information
– In fulfilling the warranty/guarantee services, we
shall cover only the assembly time and the mate-
rials used, but not any travel or accommodation
costs necessary for the fitters/engineers or any
return transport costs.
–
SOLARFOCUS GmbH assumes no liability for
any consequential costs of damages.
– The repair and/or warranty replacement shall be
carried out on site or in the SOLARFOCUS fac-
tory at our discretion.
–
The company SOLARFOCUSwill determine whe-
ther such work requires a repair or whether the
parts are to be replaced free of charge.
3.3 Claims rendered void
The warranty and guarantee claims are rendered
void if one of the following points applies:
–
Non-compliance with the technical requirements
> 4
–
Damage during transport.
– Wilful damage.
– Damage due to force majeure (water, fire, etc.).
–
Non-observance of information in the planning,
installation and operation manual.
– Insufficient energy or water, fault in the hydrau-
lics.
–
Incorrect operation, failure to perform main-
tenance and cleaning as prescribed.
– Commissioning and maintenance carried out by
non-certified companies.
–
Undocumented commissioning (no com-
missioning log) and/or maintenance (main-
tenance log).
– It is almost impossible to produce flawless pain-
ted parts; for this reason, slight defects that do not
adversely affect proper use shall not be deemed
as grounds for complaint.
–
No claims can be accepted under the warranty if
unauthorised intervention (or action that has not
been explicitly approved by us the manufacturer)
has been carried out. In addition, the goods must
be paid for within the specified payment time-
frame.
3.4 Limitation of liability
SOLARFOCUS GmbH assumes no liability for injury
or material damage resulting from:
– Failure to observe the instructions in this manual.
– Use of the product for any purpose other than for
its intended use.
–
Deployment of unqualified personnel.
–
Use of non-approved spare parts.
– Technical modification of the product by the sys-
tem operator.
4 Product information
4.1 Proper use
– The heating boiler pellet
elegance
is intended for
heating up water in closed heating systems.
–
Only use fuel as specified in the next chapter
Fuel .
4.2 Fuel
Pellets
Use wood pellets only in accordance with these spe-
cifications:
– Pellets according to the ISO 17225-2 standard,
class A1.
–
Pellets that meet the additional ENplus certifica-
tion.
–
Pellets that meet the additional DINplus certifica-
tion.
4.3 Product description
– The pellet
elegance
is a boiler for the combustion
(gasifier technology) of wood pellets.
– The boiler has an automatic fuel ignition system,
automatic fuel supply and automatic heat exchan-
ger cleaning.
–
The ash produced is collected in an ash con-
tainer, which must be emptied at regular intervals.
4.4 Spare parts
For repairs use only original spare parts or parts
approved by the manufacturer (e.g. standard parts).
The manufacturer cannot accept any liability for
damage caused by spare parts not authorised by the
manufacturer.
Operation manual pelletelegance 5