Solarflare Solarflare XtremeScale series, Руководство пользователя, Страница: 196 / 400

Solarflare Server Adapter User Guide
Solarflare Adapters on Windows
Issue 20 © Solarflare Communications 2017 189
4.19 Windows Command Line Tools
The command line tools (see Table 44 ) provide an alternative method of managing
Solarflare network adapters to SAM. They are especially useful on a Windows Server
Core installation, where SAM cannot be run locally. As with SAM, you can run the
command line tools remotely. The tools can also be scripted.
The command line tools are installed as part of the drivers installation on Windows.
See Installing the Solarflare Driver Package on Windows on page 140 .
To start a command line tool, open a Command Line Interface windows and enter
the command tool.exe:
Figure 34: Windows console to run Solarflare command line tools.
Table 44: List Available Command Line Utilities
Utility Description
sfboot.exe
A tool for configuring Solarflare adapter Boot ROM options,
including PXE and UEFI booting. See Sfboot: Boot ROM
Configuration Tool on page 190 .
sfupdate.exe A tool for updating adapter Boot ROM and PHY firmware. See
Sfupdate: Firmware Update Tool on page 198 .
sfteam.exe A tool for managing fault ‐ tolerant adapter teams and VLANs. See
Sfteam: Adapter Teaming and VLAN Tool on page 200 .
sfcable.exe A tool for that runs cable diagnostics for Solarflare 10GBASE ‐ T
server adapters. See Sfcable: Cable Diagnostics Tool on page 205 .
sfkey.exe A tool for managing Solarflare AppFlex™ licenses. See Sfkey:
License Management Tool on page 208 .
sfnet.exe Allows you to display and/or set the offload, Ethernet, RSS,
interrupt moderation and VMQ features of any one adapter,
VLAN or Team. See Sfnet on page 211 .