manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 19 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 19

Issue 11

© Solarflare Communications 2014

14

Solarflare Server Adapter

User Guide

1.6 Support and Download

Solarflare network drivers, RPM packages and documentation are available for download from 

https://support.solarflare.com/

.

Software and documentation for OpenOnload is available from

 www.openonload.org

. 

1.7 Regulatory Information

Warnings

D

o not 

install the Solarflare network adapter in hazardous areas where highly combustible or 

explosive products are stored or used without taking additional safety precautions. Do not expose 
the Solarflare network adapter to rain or moisture.

The Solarflare network adapter is a Class III SELV product intended only to be powered by a certified 
limited power source.

The equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. The equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation.

If the equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Solarflare Communications, the party 
responsible for FCC compliance, could void the user's authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Underwriters Laboratory Inc ('UL') has not tested the performance or reliability of the security or 
signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined in 
the UL's Standard for Safety UL 60950-1. 

UL Certification does not cover the performance or 

reliability of the security or signaling aspects of this product. UL makes no representations, 
warranties or certifications whatsoever regarding the performance or reliability of any security or 
signaling related functions of this product.

 

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов