manualshive.com logo in svg

Solarflare SFA6902F, Руководство пользователя, Страница: 157 / 375

Поделиться
Скачать
Solarflare SFA6902F Скачать руководство пользователя страница 157

Issue 11

© Solarflare Communications 2014

152

Solarflare Server Adapter

User Guide

 

Deleting VLANs

VLANs can be removed from a team or single adapter when no longer required.

To delete VLANs:

1

Start SAM.

2

In the Network adapter list, select the VLAN to delete. If necessary, expand the team if the 
VLAN is attached to a team then select the VLAN. 

3

From the Actions list, click 

Delete this VLAN

, or choose 

Action > Delete this VLAN

. 

4

Confirm the deletion in the Confirm Action Dialog box.

Table 37: VLAN Options

Option

Description

Name

An optional name for the VLAN network adapter.

This option will not be available when remotely 
administering the server. 

Supports the handling of priority 
traffic

Enables the handling of traffic that is tagged as 
priority. 

Supports untagged and VLAN 0 traffic

Restricts the VLAN to handling packets that are 
untagged or with VID 0. 

This option allows the interface to communicate 
with devices which don’t support VLAN tagging. 

Supports traffic solely on this VLAN

Restricts the network interface to traffic that is 
tagged with the specified VLAN. 

NOTE: 

Deleting VLANs can disrupt current processes and applications running on the server. 

Solarflare recommend only changing network settings when disruption to network services can be 
tolerated.

Содержание SFA6902F
























































































































































































































































































































































































Отзывы:

Нет отзывов