Solarflare SFA6902F Скачать руководство пользователя страница 126

Страница: 126 / 375

Issue 11

121

Solarflare Server Adapter

User Guide

Using ADDLOCAL

ADDLOCAL

is a standard Windows Installer property that controls which features are installed via

the command line. For Solarflare adapters, the following features can be installed from the
command line:

•

CoreDrivers

– Installs the core adapter drivers

•

NetworkAdapterManager

– Installs Solarflare Adapter Manager (SAM)

•

CommandLineTools

– Installs Solarflare command line tools: sfboot.exe, sfupdate.exe,

sfcable.exe, sfteam.exe, sfnet.exe.

•

Launcher

– Installs the Solarflare system tray icon, providing easy access to the Solarflare

Adapter Manager (SAM).

Multiple features may be installed by separating each feature with a comma (spaces are not
allowed).

ADDLOCAL

cannot prevent

Launcher

from being installed if either

NetworkAdapterManager

CommandLineTools

are not installed or are still being installed.

ADDLOCAL Examples:

Install the package interactively with the default installation options selected (equivalent to

Setup.exe

Setup.exe /Install)

Setup.exe /Install ADDLOCAL=CoreDrivers,

NetworkAdapterManager,CommandLineTools,Launcher

Install the package without any management tools. Displays a limited user interface with status and
progress only.

Setup.exe /Quiet /Install ADDLOCAL=CoreDrivers

Install Solarflare Adapter Manager (SAM) only. This command shows no user interface during
installation and will restart the host system if required.

Setup.exe /Quiet /Install ADDLOCAL=NetworkAdapterManager

Install Solarflare Adapter Manager (SAM) only but suppress the auto-restart.

Setup.exe /Quiet /Install ADDLOCAL=NetworkAdapterManager REBOOT=Suppress

Содержание SFA6902F
























































































































































































































































































































































































Результаты поиска

Содержание SFA6902F

Отзывы:

Solarflare SFA6902F, Руководство пользователя, Страница: 126 / 375

Результаты поиска

Содержание SFA6902F

Отзывы: