SolarEdge StorEdge SE10K-RWS, Руководство по установке

Страница: 27 / 71

Mounting the Inverter
The inverter is supplied with a mounting bracket.
Figure 6: Mounting bracket
NOTE
Make sure the mounting surface or structure can support the weight of the
inverter and bracket, and make sure that it spans the width of the bracket.
CAUTION!
HEAVY OBJECT. To avoid muscle strain or back injury, use proper lifting
techniques, and if required - a lifting aid.
CAUTION!
SolarEdge inverters and power optimizers can be installed at a minimum
distance of 50 m/ 164 ft from the shoreline of an ocean or other saline
environment, as long as there are no direct salt water splashes on the inverter or
power optimizer.
For SolarEdge inverters installed at a distance of 200 m / 655 ft or closer to the
shoreline, special brackets purchased separately from SolarEdge and SS304
stainless screws are required.
1. Determine the inverter mounting location, on a wall, stud framing or pole. It is
recommended to mount the inverter in a location protected from direct sunlight.
2. To allow for proper heat dissipation, follow the guidelines specified in
Application Note - Clearance Guidelines.
https://www.solaredge.com/sites/default/files/se-clearance-
guidelines-for-multiple-inverter-mounting.pdf
Maintaining proper clearance between the inverter and other objects
prevents power reduction due to excessive temperature.
StorEdge Three Phase Inverter MAN-01-00648-1.3
26 Mounting the Inverter